Gelatin question

Sat Feb 25, 2012 5:29 pm

Extract brewed a brown ale 2 weeks in primary, then cold crashed to corny for 2 weeks and carbonated. Good flavor but very cloudy. I poured off several pints but still very cloudy. I am wondering if I could add gelatin even though it is carbonated. Most people seem to add the gelatin to the keg and then rack from the fermentor straight into the keg. If the consensus ends up being that I use the gelatin, my plan was to use the 1/2 pack of Knox gelatin to 1/2 cup of water and add directly into the keg, shake to mix and let settle for 2-3 days before trying another sample. Thanks in advance for everyone's ideas.
apopkabrew
 
Posts: 1
Joined: Mon Feb 22, 2010 11:03 am

Re: Gelatin question

Sun Feb 26, 2012 11:37 am

Gelatin to a cold crashed keg is a fine way to use it, but would be made easier if it was in a keg with a shortened diptube that woudl allow you to draw off the beer from above the settled gelatin. If you still want to try it in your keg, I'd probably vent some of the pressure first.
Spiderwrangler
PFC, Arachnid Deployment Division

In the cellar:
In the fermentor: Belgian Cider
In the works: Wooden Cider
User avatar
spiderwrangler
Global Moderator
 
Posts: 4659
Joined: Thu Jun 03, 2010 2:09 pm
Location: Ohio

Re: Gelatin question

Sun Feb 26, 2012 2:25 pm

I've never tried adding finings to a carbonated keg. I suspect it will be a problem, because the finings will provide a bazillion nucleation points for the co2 to come out of suspension.

I'd try it out on bottle of soda, carbonated water, or a BMC first, before trying it on a carbonated keg.

If that bubbles up, and you get the menthos/diet coke effect, then you will either have to let it go flat for a week, fine it, then recarb, or just drink the cloudy beer and enjoy it.

Me, I'd just drink it as it is and rebrew, paying attention to clarity issues (ie, irish moss, good hot/cold break, finings post-ferment).
-B'Dawg
BJCP GM3 Judge & Mead
"Lunch Meat. It's an acquired taste....." -- Mylo
User avatar
BDawg
 
Posts: 4993
Joined: Tue Jul 31, 2007 5:27 pm
Location: North Bend, WA

Re: Gelatin question

Mon Feb 27, 2012 6:54 pm

spiderwrangler wrote:Gelatin to a cold crashed keg is a fine way to use it, but would be made easier if it was in a keg with a shortened diptube that woudl allow you to draw off the beer from above the settled gelatin.


+1. I made this mistake when I kegged a Wee Heavy a few months ago and had an awful taste the first few pints. It's certainly possible to use gelatin in your keg but using it when your cold crashing in secondary is what I plan on doing from here on out.
Afterlab
 
Posts: 358
Joined: Tue Jun 07, 2011 10:25 pm
Location: Minneapolis

Re: Gelatin question

Tue Mar 13, 2012 11:34 pm

You can cut your diptube if you like or you can just pour off a quarter to half a pint. Either way works and you lose beer both ways. When I use gelatin i usually have crystal clear beer after about a tasting glass worth of beer without the diptube cut.

Adding gelatin is fine to do with an already carbonated keg. Just be ready to put the lid back on after you pour it starts to foam up but if its cold you have plenty of time to put the lid on.
BrewerJ
 
Posts: 394
Joined: Sat Mar 18, 2006 7:15 am
Location: Reno, NV

Return to Kegging, Bottling and Dispensing

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.